You ideally (at least on a low budget) want 2-3V motors and at least 24V power supply.
Thread: speed issues
Results 1 to 11 of 11
Threaded View
-
09-12-2004, 04:51 PM #5
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
CNC Controlled Spindle motor speed control
By gregmary in forum CNC Machine Related ElectronicsReplies: 13Last Post: 02-28-2009, 02:01 AM -
Speed how fast an axis can move?
By jlagran he in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 01-05-2005, 05:05 AM -
Spindle Speed & Feed Rates - Question
By Moondog in forum DIY CNC Router Table MachinesReplies: 1Last Post: 07-24-2004, 12:24 AM -
min speed exceeds max speed for axis "x"?
By ljoe1969 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 4Last Post: 01-19-2004, 02:49 PM -
AC Speed Control
By georgebarr in forum CNC Machine Related ElectronicsReplies: 7Last Post: 01-07-2004, 02:33 AM
Posting Permissions
