I understand that I have to use an over-sized tap to create threads in Nylon 6/6. Is there a rule of thumb to choose over-sized taps?
I understand that I have to use an over-sized tap to create threads in Nylon 6/6. Is there a rule of thumb to choose over-sized taps?
Poor planning on your part does NOT constitute an emergency on my part!
Surely, someone has an idea.
Poor planning on your part does NOT constitute an emergency on my part!
Another option for creating accurate threads would be to heli-coil the holes.
No time to do it right, plenty of time to do it twice.