Originally Posted by
mattpatt
At the moment I've got the PP to output the G code [pretty much as I want it, but I'd like to know if there's a way to configure it to output a little differently.
It makes the first rapid move like this:
N106 G90 G0 X110. Y53.5 Z50. S1000 M3
But I want it to output like this:
N106 G90 G0 X110. Y53.5 S1000 M3
N107 Z50.
Is there something I can change in the .gpp or .mac files?
I tried a few things but it's not doing what I want.
I basically don't want all three axis to move at once. I'd like to rapid the x & y, and then move the z once it's in position.