Please attach any working parameter lists here:
These are two different parameter lists for bridgeport vmc1000/22 with heidenhain TNC410. They are both functioning machines
Please attach any working parameter lists here:
These are two different parameter lists for bridgeport vmc1000/22 with heidenhain TNC410. They are both functioning machines
Parameter Lsit from a Bridgeport R2C3 with a TNC145 Heidenhain control
This is a parameter list from a Bridgeport Interact with a TNC151 control. This is the style with the air speed change varispeed head
bump
anyone can feel free to add to this list
think of it as offsite backup.....
Gus
The mill that I purchased has the manual and parameters. I will post prior to selling.
Jim
just post them here, that is the purpose of this thread
I have the list of parameter of TNC 2500 of Bridgeport 412 interactive machine. this machine is equiped with Fanuc spindle drive and Bosch axes drives. machine maker is Bridgeport year 1992.
my email is [email protected]
attached is the file containing Bridgeport interact 412 with Heidenhain TNC 2500 control .
Ahmad Shujah
to remind me to post the others I have.........
on this thread:
http://www.cnczone.com/forums/showth...=107015&page=2
bump
oddball r2c3/151 parameters
bump
anyone have anything useful please add them here
Hi , I was wondering if anyone has the machine parameters for a 1988 Bridgeport Interact 412V Heidehnain TNC151 P control . I recently bought the machine and it had problems when i got it. ( I knew this ) I was just looking at the parameter list i got with the machine and it is for the TNC 155 control.
I'm not sure if they are the same or not.
Thanks
Those searching for parameter lists, these are what we have seen here, if you get a working set for your machine, please post it here so the next person can find them.
And if you haven't saved your parameters, DO IT, and change the damn batteries, 3 AA's people
Machine Parameter For Bridgeport Series I Interact Heidenhain TNC 2500.
Software versions in title header of spreadsheet
Thanks for all the good info here.
for those to lazy to search bumping again
people download your parameters
save them as a text file
upload them here,
instant backup
If you ask for a set you damn well better upload some here................
dear friend can you tell me how to save a program in machine via rs232