[Mr.Chips]

Mr. Chips,

Your motor is a 6-wire 1A, 5V stepper. Run the motor half-winding (green and white, red and black). Leave the unused wires unconnected and insulated. Use a 1K resistor for the current set value.

Mariss

Thanks!
OK I think I got it. :rainfro:

Revised the drawing to reflect changes.
Wired to use half-winding, 1 K resistor, and eleminated connection #11.

By the way what does the comment made by Ger21 mean? "Don't connect terminal 11 (disable), you don't need to. Unless you want to use it to disable the drive. "