I got my X2 set up and made some chips! For my first project I chose to make a bunch of clamps to hold down my little vise. I documented the build process here.
I know next to nothing about machining! This was my first project! Any feedback or advise from the gurus would be appreciated.
Results 1 to 4 of 4
-
10-08-2008, 03:38 AM #1
Registered
- Join Date
- Jan 2006
- Posts
- 58
Made my first parts! Hoss watch out!
-
10-08-2008, 05:05 AM #2
Registered
- Join Date
- Feb 2006
- Posts
- 1187
Looks good, you'll soon discover that you'll only need one on each side of the vice and you'll have spares.
-
10-08-2008, 08:22 AM #3
Member
- Join Date
- Apr 2006
- Posts
- 8159
Nice Work Seb!
Nice instructable too.
You got me, those are something I never made.
Have to put a couple on the list.
GUTGW, Hosshttp://www.hossmachine.info - Gosh, you've... really got some nice toys here. - Roy Batty -- http://www.g0704.com - http://www.bf20.com - http://www.g0602.com
-
10-08-2008, 04:31 PM #4
Registered
- Join Date
- Jan 2006
- Posts
- 58
Thanks Hoss!
Next I'm going to try to make your belt drive conversion.
Reply With QuoteSimilar Threads
-
Ware, How, And If To Start Milling Small SS Watch Parts
By mabmojo in forum MetalWork DiscussionReplies: 14Last Post: 01-10-2007, 03:57 AM -
Need parts made....
By brewerpaul in forum Employment OpportunityReplies: 4Last Post: 08-07-2005, 04:15 AM -
Need some parts made and maybe more later.
By dmgdesigns in forum Employment OpportunityReplies: 3Last Post: 10-24-2004, 07:00 PM -
2 parts to be made ...
By WsW-WYATT in forum Employment OpportunityReplies: 7Last Post: 05-30-2004, 08:45 PM -
Need Some R/C parts made
By debutis in forum Employment OpportunityReplies: 6Last Post: 04-07-2004, 04:19 PM
Posting Permissions
