[New2CNCPaul]

I think that you will find if you buy the plans, there are about 75 others that will completely agree with that statement, except the last part will change to "is amazing"

I e-mailed Joe today about cost of the plans, and the kit??costs. I know it's the machine I want to build/bring me into the wonderful world of cnc.

Looking forward to his reply

[New2CNCPaul]

I just ordered the 4x4 plans can't wait to see them!

[joecnc2006]

Here is a video in two parts, (due to length being 15 mins.) showing the Quick change chuck used with Zero plate.

[ame="http://www.youtube.com/watch?v=_MrMx3cK6gU"]YouTube - Quick Change 1 of 2[/ame]

[ame="http://www.youtube.com/watch?v=--0j1Jf3T8E"]YouTube - Quick Change 2 of 2[/ame]

Joe

[Jason Marsha]

Great videos Joe, that tool change is a lot faster than my two wrench system.

Jason

[joecnc2006]

Here is a simple little tool i made which i elaborated on Ernie's Zero for the X and Y.

[ame="http://www.youtube.com/watch?v=JcHgKazSjyA"]YouTube - Zero Edge Finder[/ame]

Joe

[jairogj]

Simply powerfull zero axes, tank´s Joe

Jairo

[ZipSnipe]

Love that center finder and the z axis plate. Brilliant!!!!!!!

[planeflier]

where is the program for the centering axis located?

[ger21]

where is the program for the centering axis located?

http://www.cnczone.com/forums/showthread.php?t=56079

[joecnc2006]

Jeff, finished his machine and is running the new Bladerunner kit with the new Gecko's, make the machine scoot along pretty good...

http://www.candcnc.com/Bladerunner.htm
scroll down you can see a "BladeRunnerSuperMAX4 Combo (aka Joe's Special)" which is everything put together for the 4x4 machine, a very nice package.


[ame="http://www.youtube.com/watch?v=4ZHliUZ2-8A"]YouTube - Joe's 4x4 with BladeRunner[/ame]


Joe

[joecnc2006]

Mr. Chips, pointed out to me I forgot to mention where I got the Quick Change Chuck, Sorry about that.

http://www.thecraftsmangallery.com/M...page=W/CTGY/RC

Here is a Link to a Review.

http://www.newwoodworker.com/reviews...nchuckrvu.html

Joe

Here is a video in two parts, (due to length being 15 mins.) showing the Quick change chuck used with Zero plate.

YouTube - Quick Change 1 of 2

YouTube - Quick Change 2 of 2

Joe

[calgrdnr]

I got one back in May it is a real cool addition . to manually zero the z, I just get bit close loosen set screw let bit slip to touch material , jog down if want more in collar tight set screw 2-3 seconds ... Beats the heck out off 2 wrenches .....

Now I need to make the xy automatic adaptor that is cool

[Glidergider]

Joe,
Nice job on the new zero tool. I got to make me one of them.

[joecnc2006]

Got a New Web Page up, to tell about the machine more, Thanks to the help of Brian.

www.joescnc.com

[Glidergider]

The web page looks great. Brian did a terrific job. Joe, You are a credit to the DIY CNC world. Keep up the good work.

And now Brian is working on a 4th Axis addition to the 4by4. I'm watching that thread with interest too.

[joecnc2006]

where is the program for the centering axis located?

http://www.cnczone.com/forums/showth...238#post436238


Joe

[joecnc2006]

The web page looks great. Brian did a terrific job. Joe, You are a credit to the DIY CNC world. Keep up the good work.

And now Brian is working on a 4th Axis addition to the 4by4. I'm watching that thread with interest too.

Yes all credit goes to Brian for the Page, and he should be getting very close to finishing the 4th axis now, can't wait to see it turning

Joe

[bp092]

Hopefully by the weekend. My nova g3 chuck, live center and adapter to the 5/8" drill rod is coming thursday. Going to install it this week and beef up the table while I'm at it.

[joecnc2006]

Here's Jims 2x4 machine almost finished, but he is already cutting on it.
It came out nice sitting on a wood base.

Joe

[joecnc2006]

Did my 1st 3D work with Aspire Saturday, took almost 6 hrs, but David mentioned my vel, and accel. was wrong so i will tweek them and should be able to cut faster. just not starting to do 3D. or 2.5d

http://www.youtube.com/watch?v=HUFYI595_mU

Joe