lets try this:
and I've tried various combinations of switching the dir and step functions with no luck
I had to put the e-stop on "emulated" in order to get the e-stop to stop triggering, if that makes any difference.
Results 1 to 20 of 37
Hybrid View
-
11-12-2008, 03:53 AM #1
Registered
- Join Date
- Aug 2006
- Posts
- 673
-
11-12-2008, 04:33 AM #2
Gold Member
- Join Date
- Feb 2007
- Posts
- 4553
Can you post a print screen of your ports pins "input signals"
-
11-12-2008, 04:57 AM #3
Registered
- Join Date
- Aug 2006
- Posts
- 673
best I can do:
all the other inputs are disabled.
CoAMarcus, I don't think I'll have time tomorrow. between full time school and full time work, I don't have a lot of time to do anything during regular business hours. I might be able to on Thursday.
Reply With Quote
Similar Threads
-
Trade offs between Moving Gantry and Moving Table
By gregmary in forum DIY CNC Router Table MachinesReplies: 11Last Post: 04-22-2011, 07:48 PM -
G540 fault problem
By jemmyell in forum Gecko DrivesReplies: 12Last Post: 10-21-2008, 11:50 PM -
Problem with manual moving in emc2
By ad_Wolf in forum LinuxCNC (formerly EMC2)Replies: 6Last Post: 06-30-2008, 11:05 PM -
Discussion of moving table vs moving gantry
By rkremser in forum DIY CNC Router Table MachinesReplies: 5Last Post: 02-20-2008, 10:59 PM -
Moving Table vs Moving Gantry; Dremel vs Router
By chuckknigh in forum DIY CNC Router Table MachinesReplies: 32Last Post: 03-28-2007, 02:48 AM
Posting Permissions
