[greasetattoo]

What is the firmware/software update?
Is that for the IM service controller?

How do you update it?
If so..
Let me know.

thanks,
Greasetattoo

[wmgeorge]

What is the firmware/software update?
Is that for the IM service controller?

How do you update it?
If so..
Let me know.

thanks,
Greasetattoo

I have been working with Carl at Carken at DeskCNC.com for a few weeks on this. I am pretty sure that I got a beta for testing, and it will be released very soon. It was a download on a link he sent me today. But it solves my VCarve Pro / carving and very small arc cut/ file issues, and may not address any other, but I really don't know.

I just went back and read the entire thread, I am thinking this upgrade might not fix your problem. Fred has posted some updates over on his "private forum" for your machine, maybe he will jump in here with some settings for you?

[greasetattoo]

Or for DeskCnc?
I have version 2.0.1.90

What is the newer version?

[wmgeorge]

Or for DeskCnc?
I have version 2.0.1.90

What is the newer version?

I did not check the version number, but I am sure you don't have.

[greasetattoo]

George,
I will check there website!

Would be nice, if they sent out e-mails to let us know.

But, I have had no problems with the version I have now.

Do me a favor and check your version..
Thanks
Greasetattoo

[wmgeorge]

2.0.2.10 Firmware 2.28 which is a big update jump from 0 .