Just started looking into machines and have learned a lot of really great features. I have received 3 quotes so far but everyone has a different prospective on the right machine for the job. I am looking to only plasma cut with the machine. I do believe the height comp. is very important along with good software. The technology is growing at such a fast rate I think I will stay with the idea of a new vs used machine. I have read about the stepper vs servo motor and that is one thing i am unsure of. I have worked in the transfer press and robotic field for years and due understand the mechanics of both but I am unsure in this application which is the right one. I want to cut 1/2 inch thick at times also I have quite an interest in cutting 20 gauge with accuracy. I am not a steel fab shop I am only one person in my shop and do not plan to have orders of more than 500 -1000 pcs at on time. I also with do one off work that I am more interested in. Sorry about the rambling just trying to give enough info to make the right decision. This is a lot of money and I do not want to be sorry later. Thanks.