[yamingf]

zax,
where are you located in Dallas? north dallas? i would like to stop by.see your machine and talk to you. i got a call from Duncanville guy who has a IEHK machine three weeks back, he had some issue on his MPC03LV PCI controller. IEHK asked for $750 for controller replacement, i fixed it by updating the firmware. i am coupled with leetro --MPC6515 and MPC03LV controller supplier to develop new software and provide customer feedback to them for possible improvement. i am glad to see a forum like this for people to share experience and exchange info, that would be good to all chinese manufacturer and customer here. you can send your contact # to my email at [email protected]

[zax15uk]

Hey Frank, I'm actually just outside the metroplex near Rockwall but do not operate as a full time business.

If you remember we have talked in the past, I was planning to replace the motor driver board with a Xylotex as that is what I use on my CNC router.

With your recommendation and further consideration I decided not to do that.

Zax.

[albo]

Just some another questions before buying.
Manufacturer offers som extra mirrors + lenses and a spare lasertube.

Is that realy needed ?
What is the normal price for a 40 W lasertube ? Can't find these price in the Internet...

iI mean maybe I can buy an otherone here after the 800 - 1000 hours ;-)
a mirror wont break or something I presume ???

Another thing; is is safe to pay in advance lets with Paypal ?
It is al lot of money and China is long walk...

[kewlkiwi]

Just some another questions before buying.
Manufacturer offers som extra mirrors + lenses and a spare lasertube.

That's definitely a good idea, at least for the lens and a spare tube - mirrors, not so much perhaps.

Buying laser tubes later on will involve paying for freight, and they are an awkward size to pack securely.
If you get a spare with your machine, then it can be included in the crate for (probably) no extra freight charge at all.

Bob