If I can get these speeds reliably with the setup I have, then I'll be very happy. I just picked up a 2.4Ghz P4 so I can at least make sure that CPU speed isn't the problem. If I continue having problems above 100 IPM, it's time for a more drastic change (ie. servos).
Steve
Results 1 to 19 of 19
Hybrid View
-
03-10-2009, 03:02 AM #1
Registered
- Join Date
- Jan 2006
- Posts
- 628
Reply With QuoteSimilar Threads
-
pros and cons
By stirling in forum Stepper Motors / DrivesReplies: 9Last Post: 08-28-2007, 03:40 PM -
Slaved Motors Pros & Cons
By destro in forum Waterjet General TopicsReplies: 5Last Post: 07-18-2006, 03:28 AM -
Pros and Cons (4 Post Design)
By BuckingFastards in forum DIY CNC Router Table MachinesReplies: 4Last Post: 03-22-2006, 01:30 AM -
Pros and Cons of Two Designs
By PaulH in forum DIY CNC Router Table MachinesReplies: 9Last Post: 10-22-2005, 03:22 PM -
What are the pros and cons of
By cncadmin in forum CNC Machining CentersReplies: 1Last Post: 05-19-2003, 06:31 AM
Posting Permissions
