Originally Posted by
MrWild
The videos were amazing. I'd have never dreamed what you showed was possible without seeing it. In fact, I'd have argued the cutter would weld to the part. I've been retired too long and my experience is in the old days of hand machining. New at the time of my retirement were the cobalt hog mills that had round tooth thread profiles. That ancient tech carries over when I've tried to program projects in my hobby shop. Might be time to see about auditing some CNC courses.
If your here your not stuck in the "Old Ways", MrWild. Our CNC ways might be a little different, but all your experience will prove outstanding on a CNC.
As I always will believe "Manual Machinists make the Best CNC Machinists"
You will SHINE!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com