Here is the problem, my solution, and the question that arises.
I just bought a new piece of machinery prewired for 220V. I could wire it down to 110, but that is a pain in the butt. I have only one 220V line in the basement right now, the one feeding the drier.
What do I need (and what traps and pitfalls are there to avoid) if I wanted to tap a line off of the existing 220V wire to feed the new machine. The machine and drier will never be running at the same time, so there is no issue there.
I've wired a ton of 110 lines in peoples houses for them, but never a 220. So I just not sure what kind of weirdness I should expect to expect to see once I start stripping back insulation.
Thanks,