[A.A]

Hello Everyone,

I am new to Heidenhain TNC 145 Controller. My question may be very stupid one but, while performing reference return (going to home position ) manually after machine is powered ON. The position displays (seven segments ) of X, Y, Z axis do not change . Why the digits on there displays not keep on changing while the machine is moving towards the home position ? Is there any one who can help me in this regard ?

[gus]

don't worry about it, just is

[A.A]

I am unable to understand your reply gus. I just came to know that i cannot drip feed TNC 145 and it appeared to me very strange i am fond of generating and using thousands (sounds too much) of lines of codes and know i am unable to understand that how am i going to tackle this issue.

[gus]

What is to understand, there is nothing wrong, digits don't move during homing. The machine has but 1000 blocks of memory, and only conversational programming, DNC is not a possibility

[A.A]

Thanks for help gus.