DPRNT is really the only way forward currently.
I have been using it and implementing it in the UK for some time now with a lot of success and have a system specifically for Haas that allows inspection reports to be created in Excel direct from the VQC Probing Templates (which are a little enhanced to include tolerance information). The reports are created in "Real Time" as well, so you can see straight away without having to press any buttons what the probe is measuring.
Attached is a pdf of how the system works, and some examples of exactly what you can get off a Haas (the values themselves are from a simulator though).
It's not just limited to Probing, you can print off cycle time and tool load information also.
Sounds just like what the US need also.
Results 1 to 20 of 30
Hybrid View
-
04-25-2009, 09:04 AM #1
Benutzer
- Join Date
- May 2004
- Posts
- 97
Reply With QuoteSimilar Threads
-
Common Variable values output into a program
By yaji63 in forum G-Code ProgramingReplies: 4Last Post: 05-17-2012, 06:17 AM -
Outputting Common variable values into a program
By yaji63 in forum FanucReplies: 20Last Post: 11-14-2011, 02:41 PM -
Set variable values in Fanuc
By aknap in forum Community Club HouseReplies: 1Last Post: 09-05-2011, 01:44 PM -
Outputting Common variable values into a program (with automated program number)
By yaji63 in forum FanucReplies: 0Last Post: 12-27-2010, 09:55 AM -
EMC2 variable pitch / variable diameter threading.
By samco in forum MetalWork DiscussionReplies: 0Last Post: 03-09-2008, 07:40 PM
Tags for this Thread
Posting Permissions
