Phil:
My axis configuration (all the same , just for test)
Motion: LINEAR
Drive Type: STEP/DIR
PulseWidth: 45
Port: 0X378
STEP PIN NUM: 8
STEP Pin is: Active HI
DIR PIN NUM: 9
Direction pin: + is HI
Motion Parameters:
Scale: 0.00079375
ACCEL: 60 Hz/s
Start Vel: 60 Hz
Maxvel: 100 Hz
BackSlash: 0 mm
Slow jog: 50 Hz
Fast Jog: 100 Hz
Jog keys: Normal
THANKS FOR HELP!