Mike you may also want to look at Ingersol Tooling.
http://www.ingersoll-imc.com/en/ingersolltv/index.htm
Material: Inconel
Tool: TFMRND2.0012CH-F
Insert: RNGX1207CH,
Grade: AS20
DOC: .040", WOC: 1.0 "
RPM: 4310, SFM: 2258, IPM: 334
Spindle Load: 55-65%
Impressive
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com