Hi Mates!
Looking for a kind hearted fellow (or lady) willing to share copies of Bosch CC220 manuals. - Anything you have.
Anything at all would be greatly appreciated.
Also, are there any "Experts" available in the Melbourne area?
Hi Mates!
Looking for a kind hearted fellow (or lady) willing to share copies of Bosch CC220 manuals. - Anything you have.
Anything at all would be greatly appreciated.
Also, are there any "Experts" available in the Melbourne area?
Hi - I can give you complete set in exchange for a the cutting parameters for LC2503E Trumpf laser. Contact me at [email protected]
bump
we really need a copy of the manual as well - can anyone give us a copy? or tell us where to find one?
Alternatively, if someone could give us a sample program that works on the CC220, we could use that to try and work out how to set up for the machine.
At present we can't program it, as we don't know how/where to give the reference points and coordinates etc.
We have tried finding the manual everywhere but have had no luck
Regards
anyone at all? The machine is sitting there doing nothing as I cannot get it working
who ever wantscc220 manual , please send me your mail id ,i will send the error code manual for cc220.
kris
[email protected]
send me your mail id .i have a error code manual ,will send you.
krishna
[email protected]
Keith
Hi,
I have the manual for CC220 but it's a printed copy. I will try to scan it and send you a copy if you still need it. For now I can provide you with a program example if still needed. It's tuned for laser cutting (on/off only, no waiting for spindle down for milling).
Sample program (insert 2 new lines at the beginnging of the file CRLF):
(DFS,P 11111 ,DRAWING1)
N10P99999902
N20G90G73
N30F850
N40M54
N50G0X0Y0
N60G0X260.387Y27.578
N70M56
N80M52
N90G3X234.647Y155.358I-45.389J57.339
N100M54
N110G0X232.759Y117.126
N120M52
N130G3X232.759Y117.126I-1.789J-36.229
N140M54
N150G0X184.087Y171.905
N160M52
N170G1X0
N180Y0
N190X184.087
N200Y171.905
N210M54
N220G0X0Y0
N230P99999903
N240M02
hey guys
don't know anything about this cc220 but some guy posted in chat asking about it - i was bored so did a google search and found the following site. Maybe it can help anyone else looking for info on it:
Bosch Rexroth Media Directory
Hi, I have some documents, user manual and more in pdf.. if you send me your e-mail address I can send you them.
Does somebody knows the code for unlocking parameters memory of BOSCH
CNC CC220M.
Standard access code, if it has not been changed is 8421.
I have had lots of experience with the CC120.
It will run standard code, plus it's variables, jumps, subroutines etc are good to use. I wish Mach3 had those features.
Custom interface to the PLC might be a bit of a mystery, without info from the machine builder.
PLC side is fairly readable if it is anything like the CC120.
Custom machine cycles are fairly easy to fiddle with.
Where in Melbourne? North, south, east, west?
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.
pass to copy EPROM
377
does not operate with this password
these are the password
252; 281; 303 ; 339; 340; 355; 377; 438; 468; 630; 683
Attachment 276624