[greenery_fr]

Can anybody help me to find out how to inital parameter on meldas 300 series??

because I have a problem with my machine and it need to initial first...

my NC system 320 M

this machine have NC alarm like:
S02 INITIAL PARAM ERROR DIAGN 46
Y03 AMP. UNEQUIPPED DIAGN UVW
EMG EMERGENCY DIAGN SRV
Z51 EE ROM ERROR

pls anybody help me on this situation...

1) Save all of your machine data to disk.
a) Tool data.
b) Machine programs.
c) Work offsets.
d) Common variables.
e) Parameters.
2) Go back to “Machine parameters”
3) Find “fix_P”
4) Set it to a “1”
5) Go to “Data I/O”
6) Go to “Erase”
7) In “Data( )” type “FORMAT”
8) Go to “Input”
9) In “#( )” type “4”
10) Press <input> key.
11) Power the NC off and then back on.
12) Reload all of the saved data.