[ger21]

Here's an unfinished shell carving I was playing around with a while back. Maybe someone could finish it off?

[cor]

hello to all

maybe this is a stupid question but how to get that 3dfile from
cnc4free.org in mach 3 as a gcode i can see it in meshlab
and tryed to convert but how and wat other soft i need
iwant to learn before my machine is ready

thanks
cor

[yohudi]

hello to all

maybe this is a stupid question but how to get that 3dfile from
cnc4free.org in mach 3 as a gcode

thanks
cor

Hi there,

FreeMill will process .STL files to gcode. You will need a Mach compatible post-processor.

Info re FreeMill is available in the 'Essentials' area at http://cnc4free.org and a link to Mecsoft post-processors is on the 'Links' page at the site. VisualMill Mach post-processors are reported to work fine.

I also believe there's a post in the CAM software thread at the zone with a functional FreeMill post-processor for Mach software.

Hope this helps

Danny

EDIT: Added the links below

Mecsoft post-processor downloads... http://www.mecsoft.com/DownloadPosts.shtml

Mach3 post-processor at the zone.... http://www.cnczone.com/forums/showpo...83&postcount=3