See you all there guys. Hopefully the rain stops so I can load up my machines.
The hall is next to the Library. If you need to unload, there is a seperate driveway for the hall and a few parking spots so move to the other carpark once done.
Details for the next bi-monthly Brisbane CNC User Group meeting is as follows;
Date: Saturday 5th September 2009
Time: Setup from 10am, Start at 10:30am till ~4pm
Where: Bracken Ridge Hall, Cnr of Bracken and Barrett Streets, Bracken Ridge, Queensland 4017
What to Bring: A machine, parts, work pieces, photos, CAD models or something else of interest. Pre-cooked food, drinks. There are shops nearby as well.
We will require a donation of around $5 to $10 (depending on numbers) to help pay for the $140 venue fee.
RSVP by posting a reply to this post and let me know if you are bringing a machine so I can allocate space and power for it.
All are welcome.
RSVP's
Confirmed: 12
Maybe: 1
CNC Machines
Confirmed: 2
Maybe: 0
Name - user ID - status
1. Claudio - ClaudioG - Confirmed - Bringing both of my CNC Routers
2. Darryl - dgreensill - Confirmed
3. Zig - Zig - Confirmed
4. Bill - wjfiles - Confirmed
5. Mark - SimjetAU - Confirmed
6. John- jkohlbach - Confirmed
7. Andrew B - dustooff - Confirmed
8. Chris - Chrisjh - Confirmed
9. Marc - mooselips - Confirmed
10. Ashley - Ashley Cobb - Confirmed
11. & 12. Dan & a mate - Djayness - Confirmed
13. Glenn - tt-boy - Maybe
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel