rcpilot82,
Looks great!
Can't wait to see it painted.
rcpilot82,
Looks great!
Can't wait to see it painted.
Free DXF - vectorink.com
Made for a friend for his birthday.
What is possible? What you will!
Anyone have a use for this? Threw it together this morning.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
That looks great rcpilot82! The felt on the rockers was a good idea too.
I had made a couple for a local hardwood supplier out of cherry, maple and walnut that they displayed in their lobby. Didn't think to get pictures of them at the time.
I also want to say thanks to Switcher and all of you here who take the time to post files and share knowledge. What a great forum!
Skip
Hi
A client of mine wants a clamshell design similar to the one seen in niches in a sitting room that is semi-circular in shape. The room is approx 30 feet along the back wall with a 15 feet radius semi- circle. Does anyone have a dxf, or any ideas about how to go about this project.
Regards
Mick
Hi
A client of mine wants a clamshell design similar to the one seen in niches in a sitting room that is semi-circular in shape. The room is approx 30 feet along the back wall with a 15 feet radius semi- circle. Does anyone have a dxf, or any ideas about how to go about this project.
Regards
Mick
What is the material?
I would think foam-board would work to your advantage, then a few skim coats of plaster.
Is something like this, what your looking for?
How deep is the working area?
Maybe some ideas here:
http://www.vectorart3d.com/store/
http://www.carve3d.com/
Free DXF - vectorink.com
This might get you started on the shell, it's a bit rough.
Free DXF - vectorink.com
Actual Pics of my hot dog roasting stick holder. .dxf's in Post #4429 above
Thanks again Switcher!
Ferny.
Can anyone help me?
I need to have this picture put into a recognizable DXF file that would be able to plasma or waterjet cut.