[cncwhiz]

I have some files that required me to install bobcad in my pc. I bought this program long ago. It is version 16.1. How do I get to the posts so I can change from the one it is using now? I need to program a fanuc 3000 and it does not use decimal points. I could use all the help I can get?

TIA

[SBC Cycle]

I don't know anyone that has a version that old. I would try going to the BobCAD support forum and search some of the archived postings there. You might also find a user that has some experience with that version.

[SBC Cycle]

Oh, and go to www.bobcadsupport.com and click on the "Post Processor" tab to search for posts for V16.

[The Engine Guy]

Don`t know if this will work for you, here is a Post for V18 through to V21 that might work, failing that you probably need to contact BobCAD.

If you do they will probably try to sell you the latest version though!!!

[cncwhiz]

Where are the posts located in the program?

[BurrMan]

C:\Program Files\BobCAD-CAM\BobCAD-CAM V23\Posts\Mill

Simple text files.

There is also a limited editor in the root installation folder called MillEditPost.

[robrea]

Hi CNCWhiz. I have some old V16 disks and books. I'll look thru them Wednesday and let you know what I find.

We didn't like V16. If you need the book let me know.

Do you still have your printer dongle?

Robert

[BurrMan]

Hi CNCWhiz. I have some old V16 disks and books. I'll look thru them Wednesday and let you know what I find.

We didn't like V16. If you need the book let me know.

Do you still have your printer dongle?

Robert

Ooops, my bad!