Anyone have an Operation Manual for an '80s-vintage Mori ZL-15SM turning center for sale or copy?
Please advise.
emexcee380
Anyone have an Operation Manual for an '80s-vintage Mori ZL-15SM turning center for sale or copy?
Please advise.
emexcee380
The Mcode list is in the ladder diagram. Do you have that?
this is what I found.
hope they help.
Mr. Tire,
Yes, we have a hard copy of the ladder and there is a partial m-code list after the address pages. Of course, in the ladder diagram itself, all the m-codes are only listed as addresses with only mnemonic abbreviations that we can only guess at.
A fellow who responded forwarded a fairly complete m-code list that has been tremendously helpful. What we really need now is meanings for the 200-series m-codes for HEAD 2 spindle and examples of how they are used.
Any help you can provide will be appreciated.
emexcee380
I'll see if I have anything tonight. The 200 Mcodes, m203,m204,m205 are live tooling spindle commands, that much I know. The rest escapes memory right now.
jcg9393,
What type of control is on that ZL?
I may have something, but it's for an MSC-501/MSG-501 control.
Shoot me an email at [email protected]