[joblo]

Hello Serafs

You could try pushing the gantry to different positions on the table if you think that it is all wired up right. I had some trouble getting our router to zero when we were setting it up.
Who did you get your router off and what model is it?

[Serafs]

Hello Serafs

You could try pushing the gantry to different positions on the table if you think that it is all wired up right. I had some trouble getting our router to zero when we were setting it up.
Who did you get your router off and what model is it?

Hi joblo

Yesterday I solved this problem, in parameters for X and Y axe zero point returning speed was just like for Z axe, but it was too slow. Now it works fine, but today I had some mechanical problems with tool change (will try to improve it)

Company name which sold us this router was Jinan GONGMING Machine equipment, and router name- DM-1325. But when I was in China I understood, that in Jinan they have a lot of small and bigger companies- clones which makes such type of routers. They use same parts for machines, so there is no big difference where they and which company exactly assemble them.