This screen set I have rewritten as I have found some problems testing it. Not retracting was one issues, calc problems etc......
Originally it was written by guy on video.
You must have blue screen installed, I also suggest having fixed plate in tool change location designated in M6start but not necessary.
I have fixed touch plate below face of my spoil board but have done testing and also runs fine if it is above it. I have found this set to do tool changing much easier.
[ame="http://www.youtube.com/watch?v=QoF99XwUQfc"]YouTube- A quick demo of a modified Mach Blue Tool Setter[/ame]
Note: this set is for inches as Native Units but can be very easy changed to mm
I have included in button scripts many descriptors to make it easier.
After unzipping drop .set file in c:/Mach3/
Happy testing, please let me know what do you think.......