Thanks MVHPV, The patent drawings supply many answers. Looking at the date of the patent raises a question; Is this the CURRENT form?
Gates' latest form, GT 2 has a form similar to a gear, an involute on the sides of the groove.
One other thing, if you can buy the sprockets, why go through all the effort to draw and make your own? Just curious.LOL
Dick Z
Results 1 to 20 of 23
Threaded View
-
03-25-2010, 04:27 PM #17
Registered
- Join Date
- Mar 2006
- Posts
- 2712
DZASTR
Reply With QuoteSimilar Threads
-
Trying to find a gear tooth profile generating software.
By Zenji in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 06-12-2014, 11:48 PM -
Designing profile follower using Mach3
By marklh in forum Mach Software (ArtSoft software)Replies: 0Last Post: 04-16-2013, 01:15 PM -
Sprocket Profile Generation
By big_mak in forum Mechanical Calculations/Engineering DesignReplies: 9Last Post: 08-17-2010, 01:25 AM -
CAD Prg for creating synchronous drive sprocket?
By MVHPV in forum OpenSource SoftwareReplies: 0Last Post: 03-23-2010, 09:12 AM -
Require DXF/DWG for 35 tooth sprocket.
By Kiwi in forum Uncategorised CAD DiscussionReplies: 4Last Post: 06-16-2009, 08:56 AM
Tags for this Thread
Posting Permissions
