I have been gathering parts for the last month or so and finally decided to start work towards building my table. Here's a summary of what I'm planning with this build:
- Precision Plasma 4x4 Gantry Kit with 2:1 Belt Drives
- CandCNC BladeRunner AIO Dragon-Cut Controller with 620oz.in steppers and DHTC
- Hypertherm Powermax 45 with Machine Torch
- 2x2 and 2x3 .120 wall square tubing
- 14GA Water Tray
- 2x1/8" Slats, 2" Spacing
- Prototype Platemarker
- Planning 5th Axis Rotary
- Cable Track Wire Management
Gallery: CLICK HERE