587,224 active members*
3,815 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > Follow error when trying to test home.

Thread: Follow error when trying to test home.

Results 1 to 2 of 2
  1. 05-22-2010, 03:22 PM #1
    evo4wrx
    evo4wrx is offline Registered
    Join Date
    Mar 2008
    Posts
    56

    Follow error when trying to test home.

    I finally got the machine going with DC 6 pole motors.
    It is moving well and is repeating on my dial guage within 0.001mm after 100 meters of left right movement and 50 meters of Z axis movement. so YAY.

    However....

    Trying to get the home setup running from the driver. It pops up with a follow error straight away. ??

    Any hints?
    Anything I can paste in the way of screen shots or diag commands that may help.
    Reply With Quote Reply With Quote
  2. 05-24-2010, 06:18 PM #2
    Xerxes
    Xerxes is offline Registered
    Join Date
    Sep 2004
    Posts
    1207
    Hi,

    Following error during homing comes from improper paramerization. Please check and modify following parameters to solve the issue:
    -Homing torque limit
    -Velocity & acceleration for homing (in GDtool trajecory planner)
    -Follow error fault trip limit (in GDtool position tuning)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Home switch error
    By bhockett in forum LinuxCNC (formerly EMC2)
    Replies: 1
    Last Post: 02-21-2010, 08:59 PM
  2. ACU RITE CONTROL ERROR FTO'S FIND HOME FAULT
    By jstwinbaby in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 02-15-2010, 06:41 PM
  3. FANUC 10M RAM TEST ERROR
    By cncmori in forum Mori Seiki Mills
    Replies: 2
    Last Post: 02-09-2010, 11:01 PM
  4. Self-test error, Fadal NC-32MP
    By Hythos in forum Fadal
    Replies: 1
    Last Post: 04-16-2009, 05:09 PM
  5. EMC2 home switch error???????
    By autorouter34 in forum LinuxCNC (formerly EMC2)
    Replies: 3
    Last Post: 12-08-2008, 09:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules