This is another training lesson for me. I would like to cut this Logo out. It was drawn with Acad and saved as a r14 dxf.
I would like the word "BEMIS" to not be cut at all. The oval and the vertical bar be at .1 cut depth.
The inside background be at .15 cut depth.
The outside border be at .2 cut depth.
The problem I'm having is the fill (spiral) cut on the oval layer shows the toolpaths to wipe out the letters.
I've tried many different variations to have Sheetcam not cut away the letters but each time it wiped them out.
Also I can't figure out why the letter " E " will not show a spiral cut but the other letters do.
The lines making up the text are all closed polys, or at least Acad says they are.
And if I choose a no offset on the layer Bemis there is a dip of cuts on the top of the " B " can't figure out where thats coming from as well.
The tutorial part 2 shows this process exactly but its not working for me, so I figure the problem must be the way I draw it up in cad, or the the way the layers are setup.
Any ideals or pointers?
Chuck