Depending on the present memory size, the memory can be expanded by setting an option parameter up to a point, after that an add on board must be also added.
Al.
Thread: Fanuc 0TC control retrofit
Results 1 to 6 of 6
Hybrid View
-
08-28-2010, 04:51 PM #1
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
08-30-2010, 01:35 AM #2
Registered
- Join Date
- Mar 2005
- Posts
- 816
Yeah, I use RS232 and DNC with my OM-C. Works great. Can store my programs offline in the PC. Don't nessisarily have to have all of your programs directly on the CNC/NC, but like for me I suggest storing the programs that you use the most on the CNC.
My programs are a little bit under 200k most of the time on the OM-C.
The shop I worked at had similar setups using Predator DNC. Worked great.
Greg
Reply With QuoteSimilar Threads
-
control retrofit, which one
By chaz6966 in forum Cincinnati CNCReplies: 7Last Post: 11-04-2010, 10:32 PM -
CNC CONTROL RETROFIT FOR LATHE
By WIRE CUTTER in forum Controller & Computer SolutionsReplies: 1Last Post: 10-26-2009, 12:24 AM -
Retrofit Anilam Control
By buff324 in forum Controller & Computer SolutionsReplies: 3Last Post: 04-29-2008, 12:22 PM -
Okuma retrofit Machmotion control
By KGD in forum OkumaReplies: 0Last Post: 04-23-2008, 04:45 AM -
SX3 spindle control retrofit?
By Greolt in forum Syil ProductsReplies: 13Last Post: 02-07-2008, 02:20 PM
Posting Permissions
