DO you know which Fanuc AC motors can run with the VSDE.
I tried some Control Techniques which did not work even after I replaced the encoders.
Im running some 750W DC servo motors right now but they arnt very gutsy at 2Nm.
So I was hoping to goto the following as I have 2 available locally at a good price.
FANUC A06B-0522-B351 AC SERVO MOTOR +
3 PHASE
8 POLES
STALL TORQUE 22 Nm
STALL AMP 2.9 AMP
90 V
AMB TEMP 40 DEG C
EXCIT PERM MAG
INSULATION CLASS F
APPROX SHAFT DIA 1/2"
PULSE CODER :
A290-0521-V581 PULSE CODER ABS2000P