588,385 active members*
5,318 visitors online*
Register for free
Login

Thread: VSD-E disable and recovery

Results 1 to 20 of 20

Threaded View

  1. 10-04-2010, 07:46 PM #2
    Xerxes
    Xerxes is offline Registered
    Join Date
    Sep 2004
    Posts
    1207
    The disable signal in opto-in 4 should work. Please check:
    1. Drive doesn't go into SPI mode: make sure input mode is not set to "Force SPI" (GDtool->General settings).
    2. USB cable is not plugged when powering up
    3. There is 3-5V applied between IO_COM and IN4. Connecting one jumper from 5V alone won't work, IO_COM would need to be connected to GND.

    There is an alternative firmware for VSD-E/XE-160 that disables error recovery move. Please find attached firmware file.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Program Recovery
    By daveyddd in forum Haas Lathes
    Replies: 8
    Last Post: 04-12-2012, 08:50 PM
  2. Following Error and Recovery
    By vegipete in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 11-13-2011, 07:22 PM
  3. DMG turret recovery
    By turner13 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 10-19-2011, 09:56 AM
  4. PROGRAM RECOVERY
    By DAVE LEMON in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 03-24-2011, 09:19 PM
  5. MC510VG TC Recovery Help
    By haastec in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 02-17-2011, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules