Spindle number two arrived the other day - a 7500rpm spindle with a 40 taper from a Haas VF3. Below are some pics along with pics of three of the servos I'm planning to use for this - Fanuc 10S models with incremental encoders. The two big ones have brakes on them. The other shorter one does not. The ones with brakes will be for the z axes. I have another 10S with a brake in a box somewhere, so that will cover everything. However I might decide to go with a 5S for the y axis on the table as that would be the smallest weight to move and could benefit from the smaller motor size. I have a few of those sitting around as well.
Thread: Gantry mill
Results 1 to 20 of 348
Threaded View
-
11-11-2010, 04:06 AM #11
Registered
- Join Date
- Aug 2008
- Posts
- 1166
CNC mill build thread: http://www.cnczone.com/forums/vertical_mill_lathe_project_log/110305-gantry_mill.html
Reply With QuoteSimilar Threads
-
new gantry mill
By redford1955 in forum Linear and Rotary MotionReplies: 0Last Post: 09-08-2013, 04:25 AM -
Gantry Mill
By lcarrudajr in forum Vertical Mill, Lathe Project LogReplies: 21Last Post: 12-02-2010, 01:20 PM -
gantry mill
By redford1955 in forum DIY CNC Router Table MachinesReplies: 1Last Post: 03-28-2010, 11:40 PM -
YAG-M: Yet Another Gantry mill
By nash in forum Mechanical Calculations/Engineering DesignReplies: 13Last Post: 11-24-2006, 05:38 PM -
CI gantry mill
By i_am_fubar in forum Community Club HouseReplies: 0Last Post: 09-13-2006, 03:38 PM
Tags for this Thread
Posting Permissions
