I am having trouble activating g41 on this new machine. There is a rough pass but it's not the same as I need for the finish pass on a casting. I am wondering what am I missing? Thank you for looking.-----
NAT11(FBORE 3/4 CICRLE.015R)
G97 S500 M03 M08
G0 Z3.5 T111111
X2.263
G94
G85 NLAP1 D0 F20.0 U0 W0
NLAP1 G81
G01 G95 Z1.336 F.1
G41 X2.163 Z1.226 F.05
G94 X2.0475 A30 L.005 F1.50
Z.676
G95 X1.3129 F.1
Z.245 F.05
G94 X1.2435 A30 F1.50(*)
Z-.0445
G95 X.960 L.010 F.003
Z-.0695
X.940 F.02 M09
G0 Z3.5
G40
G80
M09
G0 X30 Z30
M05(* VARIABLES)
M30
------------------------------
Also for a really stupid question, (I have brain freeze) How to use or where to place a G90 or G91. Do I need one of these for the use of a G41?
.....:tired: