Originally Posted by
Smrtman5
Got some new information on the problem.
I tried slowing down the send/receive buffer, but it didnt help.
Parameter #102 is set to 1 (cassette reader), which i dont understand. I changed it to 0 (RS 232), with no result, then changed it back to 1.
I can transfer programs out of the machine with no issues, which leads me to think the machines are communicating correctly.
I can transfer the same program out of them machine then back into it successfully, however it does give me the same 087 alarm.
The transfer always alarms out at the same point in the program. The line read "(t0505 #32 drill)" I deleted the "#" and the program stopped at "3"
There are 82,000 characters left, plenty for the new program. However, i tried deleting an existing program to make room. Still, same alarm.
At this point, i think im out of ideas.