Originally Posted by
schllac
I only want to go about 1/8 deep, I am looking for a pencil sketch basicly but I want it to resemble a reasonable facimile. I would oike it to look like a quarter with a little indent if possible. Insofar as the cost I have to keep it as cheap as possible so I dont make it unafordable. It will be a one time cut. I have been searching for some sample pictures of what I am looking for but to no avail. Basicaly I want to mold a cookie and bake it but I want to have a persolized picture on it
Without knowing much about what you want, I will provide my best thought of where you may want to look: If you are only doing one off's, I would look into 3D printing. A lot of new materials can withstand hot temperatures enabling you to create the "mold" to create the cookie straight from a 3D printout. Worst comes to worst, you may be able to print the mold for the clay and then go from there. I really would have to know more about this before suggesting a "good" idea though.
mechengineer
http://EdenCAD.com