587,636 active members*
4,190 visitors online*
Register for free
Login

Thread: Pitch error

Results 1 to 18 of 18

Hybrid View

  1. 12-07-2010, 07:21 PM #1
    wptcorp
    wptcorp is offline Registered
    Join Date
    Dec 2004
    Posts
    8

    Pitch

    Backlash was out .004 for both rapid and feed. It is now 0. I bet that will help, I checked it a while ago and it was ok, but things change. Spindle encoder looks to be direct drive, not real sure without opening up headstock. Thanks, Dave
    Reply With Quote Reply With Quote
  2. 12-07-2010, 09:51 PM #2
    wptcorp
    wptcorp is offline Registered
    Join Date
    Dec 2004
    Posts
    8
    Well that didn't help much. I cheated untill I can learn more. Changed the feed rate on threading by .0004 and it put lead on 0.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Pitch Error Compensation
    By crow36 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 5
    Last Post: 02-09-2022, 11:31 PM
  2. FANUC OM/OT, pitch error compensation
    By sab in forum Open Source Controller Boards
    Replies: 1
    Last Post: 06-21-2011, 01:50 PM
  3. 21iT pitch error compensation
    By metronorth in forum Fanuc
    Replies: 13
    Last Post: 03-09-2011, 02:47 PM
  4. Pitch error comp parameters?
    By smooooooth in forum Fadal
    Replies: 1
    Last Post: 02-06-2009, 12:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules