I was cutting a part yesterday and failed to doublecheck as I progressed. It turns out that my part is off in every direction by 30 to 60 thous. Could someone list causes for losing steps? My distance per step running 13/64 lead ballscrews is figured like: 13/64 / 1600 steps per revolution(default 1/8 step with xylotec) = .000126953125. start speed=500 accell=1000 max speed=5000. I kept these numbers low, not sure if this is good for stepping.
step pulse = 0. Any help on what could be the cause? specs. turbo cnc with xylotec. motors don't seem to struggle and all lock up when powered. Running turbocnc v3.1a