I made this today from a scroll saw pattern. Cut it out in plexiglas and now cleaning it up before I post a pic.
Please check out my CNC blog
http://cncinside.com
Here's the first project on my home CNC router. $40 in miss-cut maple later I got it to work right. Still have some tweaking to do on the machine. I finished the wedding gift the night before the wedding. Whew!
Ferny.
A friend ask for a plaque with a quad on it. I thought I had one, but I don't. Would anyone care to share a dxf of a quad?
Thanks
dave
That is really nice Ferny.
Any chance someone could help out with recreating this circle design? I just need one layer not both. I havent used corel in a few years and cant seem to get it right. Thanks for any help...
OCP,
See attached dxf for your pattern.
Hope this is what you want,
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Thank you so much, should be perfect
Here's a picture of a horse I cut at Christmas, the original artwork came from this thread, not mine.
STL file is 36Mb so cannot upload.
David
( never stop learning )
http://www.steamcastings.co.uk/
little help here trying to cut our logo but can not for the life of me turn into a dxf/dwg its kicking my butt. can any one help?
Anyone have any wooden game boards? I have cribbage and Chinese checkers. Is there anymore kicking around? My kids love these!!
Thanks!
worked thanks
Here is one that I made. I used a 3/4" thick board (hardwood) and machined one game on each side. Turned out great.
GC
Thanks!!
looking for jet planes top and side view and atv's for my 6 year olds room, going to cut into 18g aluminum