N5 (File Name = CNC_TEST on Monday, October 04, 2010)
N10 (Default Mill Post)
N15 G91.1
N20 G0 Z1.0000
N25 M3
N30 X19.3433 Y31.0613
N35 Z0.0000
N40 G42
N45 G1 X14.3433 Y26.0613 Z0.0000 F60.00
N50 G0 Z1.0000
N55 X19.3433
N60 Z0.000
N65 G42
N70 G1 X14.3433 Y31.0613 Z0.0000
N75 G0 Z1.0000
N80 X14.3433 Y26.0613
N85 Z0.0000
N90 G1 Y31.0613
N95 X19.3433
N100 Y26.0613
N105 G40
N110 X14.3433
N115 G0 Z1.0000
N120 X20.3789 Y28.5613
N125 Z0.0000
N130 G2 Z0.0000 I-3.5355 J0.0000
N135 G0 Z1.0000
N140 M5
N145 M30
my code! Still cant figure out if it is my offset causing the rounded corner or what is it backlash or somtihing else. Thank You for Your code it was great to have a second set of eyes on this!!!. Ill upload an image of my pen plot tomarrow. Im gona crash for the night. Im going to have great dreams knowing it is working just need to dial it in and ill be cutting this weekend. My first peice is going to be a new router holder for my big 2/14 hp craftsman. Ill post up the code so you can look at it. Im a little scarred i will not get the passes correct. Thanks agian