My Mill errored out while running a flat piece of material. The alarm came up on the screen as (Spindle Tool Clamp/Unclamp Alarm) The Alarm Number is (AVE0166) Any help getting back up and running would be extremely appreciated.
Thanks Alot.
My Mill errored out while running a flat piece of material. The alarm came up on the screen as (Spindle Tool Clamp/Unclamp Alarm) The Alarm Number is (AVE0166) Any help getting back up and running would be extremely appreciated.
Thanks Alot.
Sorry I didnt specify. I just need to know how to reset the alarm. I have shut the machine down and started it back up. It still wont reset.
Thank you.
sounds like a prox switch above the spindle that confirms tool clamp.
Ok thanks Im going to climb up there and check it. I will let you know if it worked
I should also mention that the machine error was caused by stalling out in a run.
Well the proxy switch option didnt do it. Any other options besides calling a tech? Thanks again.