[1462danny]

Thanks for the file, looks great.

[TULIO_MA]

do a lot of downloads of CncZone.
But now I wil give my contribution.
Access my adress and see my work.
Hugs.
TRABALHOS SÉRGIO MENDES

[TULIO_MA]

I do a lot of downloads of CncZone.
But now I wil give my contribution.
Access my adress and see my work.
Hugs.
TRABALHOS SÉRGIO MENDES

[TULIO_MA]

I do a lot of downloads of CncZone.
But now I wil give my contribution.
Access my adress and see my work.
Hugs.
TRABALHOS SÉRGIO MENDES

[souriceaux]

Hello everyone,
This forum is really extraordinary, I am looking for the Stargate (turning on itself) in dxf.
If someone that I am the happiest.:banana:
Thank you all

My machine is a laser LS800 40W

[metalworkz]

Hello everyone,
This forum is really extraordinary, I am looking for the Stargate (turning on itself) in dxf.
If someone that I am the happiest.:banana:
Thank you all

My machine is a laser LS800 40W

Hello,
You may need to do some further editing, cleanup and or scaling but here is a .dxf of a stargate.

[souriceaux]

Hello,
You may need to do some further editing, cleanup and or scaling but here is a .dxf of a stargate.

:cheers:
Thank you very much for the door, I will work to make it turn.
Again soon
AND THANK YOU

[kelef]

metalworkz beat me, as usual, and a better job than mine, post your final dxf souriceaux I really would like to know what you call a "stargate turning on itself", I was looking at the same projection outline as metalworkz's - :rainfro::rainfro::rainfro: kelef

PS metalworkz-props man and I hope I am not bumpin' convention but I've replaced my version with yours:cheers:

[metalworkz]

Hi Kelef,
No problem, the file is there for whoever can use it. I had to search for a usable picture and even after finding this one it did not trace very well. I did several traces and spent probably too much time editing this .dxf, and then decided I would stop there and post the file as needing more work. I was not really sure what he meant by 'turning on itself' either and hoped what I had done was at least usable. I'm thinking of making some smaller versions of this file into a drink coaster or perhaps a key grip.

[JasonD]

Can someone convert this to a vector /dfx for me?

Thanks!

[Switcher]

Can someone convert this to a vector /dfx for me?

Thanks!

Needs some node cleanup, should get you started.

:cheers:

[JasonD]

Needs some node cleanup, should get you started.

:cheers:

Thanks!!!!

[AMC89]

Hi, could someone please convert this logo for me.
My attempt was very poor lol.
Thanks in advance


Sorry for double post

[AMC89]

Hi, would someone be able to convert this for me.
My attempt was very ragged.

Thanks

[kdiver58]

I have a picture I need turned into a file the I can machine with my Hurco KMB-1 with a BX control. It would be about 1.000 tall by .625 by .062 deep .. What would be the cost to generate this file for me ?

Or if you have a better picture or file .. more the better .. I need to burn the likeness of a navy MK V helmet in a mold I promised a friend a LONG time ago .. I'd like to get it off of my plate.

Thanks .. K [email protected]

http://thumbs3.ebaystatic.com/m/mT8_...UmJF-Q/140.jpg

[fretsman]

Hi, would someone be able to convert this for me.
My attempt was very ragged.

Thanks

Here ya go-

Dave

[steel3470]

i cant for the life of me come up with a sign
have my anivrsory comeing up and can not come up with a good sign.

trying to have like a saying cut out of metal i can put up in our room for the wife.

like...

LIVE LAUGH LOVE
NEVER ENDING LOVE

ANY HELP WOULD BE GREAT

[steel3470]

this is the best i could do

[bigj121]

i cant for the life of me come up with a sign
have my anivrsory comeing up and can not come up with a good sign.

trying to have like a saying cut out of metal i can put up in our room for the wife.

like...

LIVE LAUGH LOVE
NEVER ENDING LOVE

ANY HELP WOULD BE GREAT

Try this one!!

[p38nut]

Try this one!!

And then the fight started...:stickpoke