587,997 active members*
1,650 visitors online*
Register for free
Login

Thread: HOW TO SET THE MACHINE ORIGIN TO 0,0,0 IN THE SW CORNER

Results 1 to 4 of 4
  1. 06-03-2011, 09:10 AM #1
    TheNigerian
    TheNigerian is offline Registered
    Join Date
    Apr 2006
    Posts
    59

    HOW TO SET THE MACHINE ORIGIN TO 0,0,0 IN THE SW CORNER

    Hi.

    I am the proud owner of a KT-2514.

    The machine's preset coordinate axes - in mm -have the bottom left corner as (390,-200),the bottom right corner as (-200,-200), the top right corner as (-200,180) and the top left corner as (390,180)

    Please help: How can I change this to : bottom left (0,0) and top right (590,380).

    Deep regards.

    Reply With Quote Reply With Quote
  2. 06-03-2011, 05:04 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    Where are the home switches?
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 06-08-2011, 10:16 AM #3
    TheNigerian
    TheNigerian is offline Registered
    Join Date
    Apr 2006
    Posts
    59
    There are no home switches installed Gerry.

    I only set soft limits.
    Reply With Quote Reply With Quote
  4. 06-08-2011, 12:14 PM #4
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    You need to jog to the lower left corner, and click the ref-all button. Make sure in general config you have Auto Zero DRO's checked.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. FANUC OM ORIGIN
    By ILCORKILL in forum Fanuc
    Replies: 9
    Last Post: 11-17-2009, 05:32 PM
  2. Tool ATC arm Origin
    By Kool Parts in forum Haas Mills
    Replies: 2
    Last Post: 11-03-2009, 07:58 AM
  3. Origin and mazak??
    By Fendertok in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 12-13-2006, 01:06 AM
  4. Point of origin.
    By MonkeyKong at d in forum Mastercam
    Replies: 8
    Last Post: 07-04-2006, 06:40 PM
  5. Machine home vs part origin question
    By yukonho in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 01-23-2006, 03:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules