[nuzmeed]

I have Noticed One Thing!
that Machine is again in " Machine Configuration "

Have Managed to change the parameters in Metric system now its ok.

X=610.000 MM
Y=355.000 MM
Z=127.000 MM

.

Now after power up the machine, its in " Machine Configuration "

If I press Soft Key " Exit "

it goes to NEXT screen " INPUT "


so, I how do I get out from This " Machine Configuration " Screen

I have attached Both The Screens Pictures for details


may be because of bad parameter settings X is moving Wrong side.

Please guide me to put the values for XYZ