Klox, I use Agie wire edms. They're old, but they still hold a few tenths when needed. I have a 73' dem 15 and a 77' 15/30, I program them with Bobwire 10. Glen is currently writing a backpost file to convert my old Agie programs to a drawing file. So far he's done a fine job and is very close to solving my problem. I will probably update to Charmilles 4020si or another Agie. So, you might check out some of the used dealers like Hycon, Edm Network, Peak EDM, Mcwilliams, Machinery Values and there's alot used dealers here in the states.
Your on the right with swiss made products, I'm not familiar with the brand that you are looking at. I just know from having an Agie 45L and a Charmilles E10 that they're still running after all these years. Jim Jacobs ("BobCad/Bobwire Rocks"!!!!!)