Hello to everybody here, i hope to see some fellow countrymen here also.
My goal is to build my own cnc router/mill , but first i want to start with foam cutting because it's simpler.
Good luck to all of you.
Hello to everybody here, i hope to see some fellow countrymen here also.
My goal is to build my own cnc router/mill , but first i want to start with foam cutting because it's simpler.
Good luck to all of you.
Hello,
I'm also from Romania. I'm now waiting for a Biesse Rover A4.3 woodworking CNC machine to arrive.
Good luck with building your own cnc.
Hello from Arad, Romania. I also intend to build a 3 or maybe 4 axis CNC router/mill.
First step is already done: the TB6560 board arrived today on my desk and 2 matrix printers was killed for motors.
For now, just playing with mach3 and 3 motors...
Regards,
Seb
:cheers:
Hi,from Romania too!
I'm trying to build my own cnc(1500X1000X300),and so far i have only the plans and some 4$$$ .
It is a hard task to find all the components with a restrained budget .
Hi,
I want to build a foam milling machine about 1000x2000x1000 mm and I would like to know if there are somewhere the plans for such thing, available for download.
I am from Galati - Romania.
All the best to all of you guys !
Regards,
Adrian
OK Nokturn, thanks for the advice, I have posted a new thread I hope I will have some advices as well.
Best,
Adrian
Well hello there !
I'm from Romania too Check this out and if you like it, please vote : http://www.cnczone.com/forums/cnczon...more_cncs.html
The thing is that if I get my workshop done, it would be also easier for you to make your CNCs in my workshop