Hello.
I work in a company that owns some HURCO machines. One is a HURCO VMX 24S. After a "tech" guy came to fix some issues on the machine, we started to have some issues on axis z
So let me describe what is happening:
-on power up everything is ok
when i'm trying to calibrate axis, x is ok, y is ok, but z it goes to 0.006 and an error message is displayed "Axis limit switches +Z" and on the bottom of the screen " Following error on axis z"
-if i reset servos and calibrate again, z it goes to 0.012 and then to 0.018 and so on
- i can manually jog x and y axis, but not z
-spindle is turning ok
Does anyone know ho to try and fix this?
I have attached a picture of the screen.
PS: i'm not a very tech-know-how guy so please try to explain as clear as possible.
Thank you