[RAGE]

Can any1 turn this into a dxf for me? Im doing a little project for a friend of mine.

THX

[wattmetal]

CAN SOMEONE HELP ME IN CONVERTING THIS 44" SIGN INTO dxf FOR CUTTING ON PLASMA TABLE - VULCAN /LOCKFORMER.

[joecnc2006]

CAN SOMEONE HELP ME IN CONVERTING THIS 44" SIGN INTO dxf FOR CUTTING ON PLASMA TABLE - VULCAN /LOCKFORMER.

the original image is poor quality, but here is a dxf and you will need to smooth it out a little.

Joe

[joecnc2006]

Can any1 turn this into a dxf for me? Im doing a little project for a friend of mine.

THX

I have a different image that worked better for me, yours was not clear enough.

Joe

[RAGE]

Thanks joe....that will work x~cellent

[wattmetal]

Thanks JoeCNC2006..... here is another file that is saved as a Bitmap that may be better to convert to DXF

thanks!

[joecnc2006]

Thanks JoeCNC2006..... here is another file that is saved as a Bitmap that may be better to convert to DXF

thanks!

You attached my DXF file instead of the image file.

Joe

[wattmetal]

sorry for that@ the bitmap exceeds the 500KB limit for this site so I was trying to send you the zip file, instead>oops.... Here is the bitmap file

[Switcher]

:cheers:

[Razoredge]

Hi, New guy here. This is an elk I just did. Scanned a pic into Corel draw x3, traced it and exported as a dxf. Works really good for plasma. Hope it works for you guys.

Mark

[Razoredge]

Here's the photo it came from.

[Switcher]

New DXF File ---> Design 43


.

[Maccarly]

Eiffel Tower 245 cm high Acryl 6 mm

[kalmah]

THe part isn't nice, but the material is very nice...
7 threads per pieces... M3.



It's quartz... Hardness of 1000 HV30

[blackbeard52]

Here is a door I hope to duplicate as soon as I finish the everlasting build of my CNC Router....

bob

[Bluegillman]

Here is a door I hope to duplicate as soon as I finish the everlasting build of my CNC Router....

bob

How big is the table? What kind of router? I like the door too!

[Jamf2]

Here is a door I hope to duplicate as soon as I finish the everlasting build of my CNC Router....

bob

Can you send a picture of the back side? Is the wood just one sided (the limbs) and the other side just glass?

[blackbeard52]

Yes the door is one sided. 4x8 table size

Bob

[Maccarly]

I am still in the search for 3D-Puzzle-DXF-Files von Airplans B2/F 16/117 or Apache helicopter. Can someone help me there further?
Horst

[jhowelb]

OK, my turn to contribute!

(if only I could upload 3000 k bytes!